Ikan beholder 3 how to#
Ikan beholder 3 full#
Ikan beholder 3 plus#

A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Inverted mode can be operated in conjunction with any of the lock and follow modes.

Switch to inverted mode at any time by simply flipping the handle over the camera.

Ikan beholder 3 full#

The 3-axis follow mode gives you full control, allowing you to pan, tilt, and roll. In pitch and yaw-axis follow mode, the EC1 will follow your pan and tilt movements. In yaw-axis follow mode, the EC1 will only follow your pan movements. The EC1 features 3 different follow modes.After a few seconds, the camera will lock and hold its position until it is reset back to default. Quickly lock your camera into any position by manually pointing and holding it in any direction.The camera's position will stay the same no matter how you move the handle. In Lock Mode, the Yaw, Pitch, and Roll axes work together to keep the camera fixed and pointed in one direction.Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer.The EC1 Beholder features three 360° rotating brushless motors that give you a limitless range of motion along all three axes: yaw, roll, and pitch.These batteries are rechargeable from within the EC1 via an included micro-USB AC adapter, and can also be charged using optional chargers such as the ikan ICH-SC4. The EC1 runs on three supplied 18650 batteries that provide 8 to 10 hours of operating life when used continuously, and up to 20 hours when the gimbal is switched between shooting and standby modes throughout the day. It also has a 1/4'-20 threaded mounting hole on the handle for attaching accessories for advanced setups, and a 3/8'-16 threaded mounting hole on the bottom for mounting onto a tripod, monopod, and other support gear. The EC1 is designed with a quick release baseplate that allows for convenient camera attachment and tool-less balancing. The EC1 also has an OLED display on the rear that confirms the selected mode of operation and provides battery life info. The EC1 also features a lock mode that sets the camera in a fixed position, and a point-and-lock mode that locks the position you hold the camera in for a few seconds. Auto-inversion lets you use the gimbal with dual-handle support systems like the ikan DGH.

Ikan beholder 3 plus#

The EC1 offers three follow modes plus an auto-inversion mode that allows for upside down operation. The gimbal employs an adaptive PID algorithm to deliver stable rotation. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The ikan EC1 Beholder is a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras weighing between 2 and 4.5 lb.

10 Reasons to Choose a Handheld Beholder Gimbal vs Traditional Cinema Gimbal.

ikan Corp: Beholder EC1 3 Axis 360 degree Gimbal.

Ikan Corp: Tech Corner - Beholder EC1 3 Axis Gimbal Stabilizer.

Ikan Corp: Tech Corner - Beholder EC1 3 Axis Gimbal Stabilizer Balancing Tutorial.

Ikan beholder 3 how to#

Download an official ikan user manual in which you will find instructions on how to install, use, maintain and service your product.Īnd do not forget – unsuitable use of a ikan product will considerably shorten its lifespan! Health and property during use, as well as recognition of liability on the part of the manufacturerįor possible defects should you make a warranty claim. User manual is an integral part of any ikan product,Īnd if it is sold or transferred, they should be handed over jointly with the product.įollowing the instructions for use is an essential prerequisite for protecting That need to be followed during installation and operation.īefore starting your appliance, the user manual should be read through carefully.įollow all the safety instructions and warnings, and be guided by the given recommendations. User manual for the ikan EC1 Beholder 3-Axis Handheld Gimbal contain basic instructions Authorized service for ikan See All Gimbal Stabilizers.Troubleshooting (does not switch on, does not respond, error message, what do I do if.).Technical information and basic settings.Product category: See All Gimbal Stabilizers ikan.User Manual for ikan EC1 Beholder 3-Axis Handheld Gimbal Stabilizer Click to enlarge the pictureĬontents of the user manual for the ikan EC1 Beholder 3-Axis Handheld Gimbal